澳门金沙

澳门金沙登录平台5052铝板的生产流程有哪些?

来源:

5052铝板的生产工艺通过这几进程:配料--切开--刨槽--切角--折弯--组板--加筋--复检.
5052 aluminum plate production process through these processes: ingredients - cut - cut - planer - cut angle - bending - group board - reinforcement - reinspection.
配料:按工厂所接的单,进行资料型号、规格、色泽的选择,以后运到切开机前待切开.
Ingredients: select the data type, specification, color and lustre according to the list of the factory. It will be cut before cutting to the cutting machine.
切开:进行切开时,先将定位器调到所需的尺度,先切一小点后,复核尺度是不是与需求尺度相契合,相符时开始切开,反之进行调整,直至契合停止.在切开时,方向要准确.从左向右、从上至下,禁绝反切;切开结束时进行校验,看看是不是契合规范,以后将板块轻放于清洁渠道清洁,防止板块饰面受损.
Open: open, first locator to the required scale, first cut a small scale after the review is not fit with the demand scale, began to open match, and adjusted to fit in until stop. And, to be exact. The direction from left to right, from top to bottom, from Fanqie; open check at the end to see is not meet the standards will be gently on the plate clean clean channel, to prevent the plate facing damage.
刨槽:刨槽时要注意的是必须将加工单图意作再次剖析、确认、定型.

铝板生产厂家
Planer: the planer should pay attention to the need to re analyze, confirm and shape the processing chart.
切角:冲角机上冲切,切角不允许超越刨槽中心线.
Cutting angle: the punching angle machine is washed and the cutting angle is not allowed to surpass the center line of the planing slot.
折弯:要注意不能重复的进行折弯,最多折弯两次,防止疲劳损坏.
Bending: to be careful not to repeat the bending, maximum bending two times, to prevent fatigue damage.
组板、加筋:首要准备好组板的资料及东西,要注意组板进程不能损害板块饰面.
Group board, reinforcement: the first preparation of the data and things of the board, it is necessary to pay attention to the board process can not damage the plate decoration.
复检:进行对竣工的5052铝板进行复检,看看是不是契合制造规范,防止在出厂时给厂家带来不好的作用.
Recheck: carry on the reinspection of the completed 5052 aluminum plate to see if it fits the manufacturing specification and prevents the factory from bringing bad effect to the factory when it comes out.
以上内容就是铝板生产厂家为大家整理的分享,更多的精彩内容请进入: http://www.jndclyyxgs.com 大家会有专人为您解答,你的支撑是对大家工作更好的支撑!
The above content is the aluminum plate manufacturer's arrangement for you to share, more wonderful content, please enter: , we will have someone to answer for you, your support is better support for our work.

在线咨询
XML 地图 | Sitemap 地图