铝板生产厂家

铸轧和热轧对氧化的影响是什么?

来源:  发布时间:2020-03-11 11:53:56  

  铝板生产厂家专业铝板应采用铸轧(俗称冷轧)和热轧(不论热轧和压铸,最终一定是冷轧成形)1,轧制板(即你说的冷轧钢板)是使用铝锭和其他原材料融化,铝水直接流入两大滚轮,滚动的所需的铝坯(通常约8毫米的铝卷板),冷滚压成形后你想铝板的厚度,所以容易出现水波纹。
  Aluminum plate manufacturers should adopt casting rolling (commonly known as cold rolling) and hot rolling (regardless of hot rolling and die casting, the final product must be cold rolling) 1. Rolling plate (i.e. cold rolling steel plate) uses aluminum ingot and other raw materials to melt. Aluminum water flows directly into the two rollers to roll the required aluminum billet (usually about 8 mm aluminum coil). After cold rolling, you want the thickness of aluminum plate, So water ripples are easy to appear.

铝板生产厂家
  而原材料如热轧板则是铝冶炼,铝水流入方型模具制造铝坯(即铸坯)。深井锭),通常由铝坯厚度,拉纤逆流或毫米厚(厚度),铝坯后通过五六百度在烘箱加热小时(也称为均匀化处理),飞机表面后,经过热轧和冷轧过程、复杂很多,因此产生更稳定的多辊铸造铝,好多了。(在成本方面,更加均匀化处理,在加热油燃烧的同时,还会有大型机器热轧用电等,成本要高得多)问阳极氧化前,铝板没有出现水纹,为什么阳极氧化后铝板会出现水纹?
  The raw materials such as hot-rolled plate are aluminum smelting, and aluminum water flows into the square mold to make aluminum billet (i.e. casting billet). Deep well ingot) is usually made of aluminum billet thickness, fiber drawing countercurrent or millimeter thickness (thickness). After the aluminum billet is heated in the oven for hours (also known as homogenization treatment) through 56 Baidu. After the surface of the aircraft, after the hot rolling and cold rolling process, it is much more complicated, so a more stable multi roll casting aluminum is produced, much better. (in terms of cost, more uniform treatment, while heating oil is burning, there will be large-scale hot rolling machines, etc., with much higher cost.) ask why there is no water mark on the aluminum plate before anodizing, and why does the water mark appear on the aluminum plate after anodizing?
  之前为什么阳极没有水波纹,阳极,之后才与铝板的生产过程,因为热轧钢板或铸轧板是否通过冷轧,最后水波纹是轧制板两个数据的研磨轮,之前未加工的肉类是看不见的,但是你可以在阳极碱洗和酸洗,现在应该还能看到一点点。然后如果用自然色氧化变得明显,硬氧化就更明显。
  Why there is no water ripple on the anode before the production process of aluminum plate? Because whether the hot-rolled steel plate or cast rolling plate passes the cold rolling? At last, the water ripple is the grinding wheel of two data of rolling plate. The previously unprocessed meat can't be seen, but you can see it in the anode alkali washing and pickling. Now you should see a little. Then if the natural color oxidation becomes obvious, the hard oxidation is more obvious.
  以上是铝板生产厂家为大家先容的相关内容,想要了解更多内容,欢迎访问网站:The above is the relevant content introduced by the aluminum plate manufacturer for you. To learn more, please visit the website: http://www.jndclyxgs.com

在线咨询
XML 地图 | Sitemap 地图